0%

Choosing the Right Cutting Tools for Aluminum and Carbon Fiber

The few cutting tools included with the machine are mainly for testing the machine, and they work for wood and plastic. For professional materials like aluminum sheets and carbon fiber boards, specialized tools are necessary. Below we cover the recommended tool types and processing notes.

Cutting Aluminum Sheets

Aluminum is soft and highly ductile; chips easily stick to the tool during cutting, and chip evacuation is the primary challenge.

Recommended tool: Single-flute aluminum end mill, usually made of solid tungsten carbide. The single-flute design provides ample chip clearance for smooth evacuation, effectively preventing aluminum chips from adhering to the cutting edge. This avoids secondary cutting that causes tool breakage or poor surface finish.

Key features: The cutting edge should be mirror-polished to reduce cutting resistance and frictional heat. A ZrN (zirconium nitride) coating further improves anti-adhesion performance and tool life.

Processing notes: Always use compressed air or cutting fluid to blow away chips and cool the tool. Aluminum has a high thermal expansion coefficient; accumulated heat will cause dimensional deviation.

Single-flute aluminum end mill - OMIOCNC

Cutting Carbon Fiber Boards

Carbon fiber is extremely hard and abrades tools like sandpaper. Standard carbide tools dull within just a few minutes.

Tool material: Diamond-coated carbide is the most cost-effective mainstream option. For mass production, PCD (polycrystalline diamond) tools last 10–20 times longer than standard coated tools.

Edge types:

  • Compression end mill: Opposite spiral directions on the upper and lower sections compress fibers inward from both surfaces, preventing delamination and burrs along the cut edge. The transition point of the edge must sit within the board thickness.
  • Diamond-grain edge (diamond pattern / serrated edge): Fine staggered teeth distribute cutting force, ideal for contour cutting of composite materials.
  • Diamond-coated tungsten carbide roughing (corn) end mill can be used for carbon fiber roughing or less demanding cutting applications.
Diamond-coated carbide tool for carbon fiber - OMIOCNC