Blog

How to connect X6-2200L limit switch？

see below picture, plug the two wires arbitrarily to A&B pins of switch .

1. For plastic materials such as ABS/PVC/POM/nylon, use a speed of approximately 18,000 RPM.
2. For 6061 aluminum and H59 brass, the speed is approximately 20,000 RPM.
2. For acrylic, the speed ranges from about 18,000 to 22,000 RPM.

Due to the National Day holiday, we will stop shipment from September 28th to Oct.6th. From September 28th to Oct.6th, you could still place your order on our website.

Shipment will resume on Oct.7th, 2015.

European buyers please note below informations:

For Italian buyer:
Italian buyer needs to provide VAT/Tax number to us.

For German buyer:
if Shipping address include company name, buyer needs to provide VAT/Tax number to us.

For UK buyer and Norway buyer:
if choose shipping by Fedex,we must to declare full value when shipping.

Prohibit to plug or unplug the USB cable in an energized state! Otherwise it'll cause to burn electronic components.
Correct steps:
Step 1, plug the USB cable;

Step 2, open the software (to establish communication connection);
Step 3, turn on the laser power;
Step 4, start working.
Step 5, after working, turn off the laser power first, then quit the software;
If you want to unplug the USB, you must turn off the power and quit the software.

Dear Customer, Chinese New Year festival is coming soon, we will leave on January 29 ~ February 18. In the meantime we will stop shipping.
During our holiday, you still can buy machine from our website, we will shipping all the order on February 19~20.

Omiocnc.com officially opened HTTPS encryption (SSL) access, which can better protect access to data security and customer privacy.