Blog -omiocnc.com

Blog

"find no xhc ncusbpod" means the machine is disconnected to your computer. It is a common mistake and is usually caused by the user's computer. We all know that this is international transportation, so each machine has been carefully tested before packing.
If this error message appears, please follow the instructions below.

Reasons:
1, Not copied the DLL drive files.    Copy
2, Not direct connect to your computer.    Connect to computer directly.
3, Computer USB port output pulse unstable.    Change USB port to try.
4, Interference from other large software.     Stop running other software.
5, Interference from other external USB devices.     Remove other USB deivce.
6, USB cable problem.         Change a USB cable.
7, Computer problem.     Change a computer

Other important suggestions:
1, Prepare a computer and run only MACH3, which is used as a dedicated computer for the machine.
2, Please use a transformer to stabilize your voltage at 110v or 220v. Japan user please use 110V power.

Read More

Vacation notice

9/27/2018 4:56 PM

China's National Day is coming, and most of the logistics companies will stop working, so we will stop working during the holiday. In addition, due to the delivery from our factory(Hubei Province) to our freight forwarder(Hong Kong) needs three days, so we will stop the shipment early.

1, We will stop shipments Sep 28th - Oct 6th,  During this period, you still be able to continue place orders on our website, orders in this period will be shipped on October 7~8.

2, We will leave for the National Day vacation from Oct 1st - Oct 6th  2018,  During this period, your mail we will reply within 48 hours, if any inconvenience please understand. 

Sep 27th, 2018 . 
Lance Chen 

Read More

1. Acrylic cutting process, V shape single blade acrylic cutter is recommended. Its characteristics are smokeless, tasteless, fast and efficient. If the machined surface needs a frosted effect, it is recommended to use a double-edged three-edge spiral milling cutter.

2. MDF cutting (advertising for mold opening). It is recommended to use a double-edged, large-displacement spiral milling cutter. It has two high-capacity flutes and a double-edged design. It not only has a good chip removal function, but also achieves Very good tool balance.

3. Aluminum plate cutting, single-edged aluminum milling cutter is recommended. No sticking during processing, high speed and high efficiency.

4. Precision small relief processing, it is recommended to use round bottom V shape bits.

5. Cork, MDF, original wood, PVC, acrylic large deep relief processing, ball-end milling cutter is recommended.

6. The processing requires no burr cutting on the upper and lower surfaces. It is recommended to use single-blade, double-edged upper and lower cutting bits.

7. Metal engraving processing, it is recommended to use a metal flat bottom bits.

8. 3D engraving process using 3D carving bits.

9. High-density board, solid wood processing recommended single-blade wood special milling cutter.

10. For the processing of multilayer boards, straight slot cutters are recommended.



Read More

Vacation notice

1/19/2018 9:02 PM

Vacation notice

The Chinese lunar New Year is coming soon, and most of the logistics companies will stop working, so we will stop working during the holiday. In addition, due to the delivery of the factory to our freight forwarder needs three days, we will stop the shipping early.

1, We will stop shipping from February 6 to February 23,  During this period, you will still be able to continue place orders on our website, orders in this period will be shipped from February 24.

2, We will leave for the vacation from  February 10 - February 22  2018,  During this period, your mail we will reply within 24~72 hours, if any inconvenience please understand.

 
January 19th, 2018
Lance Chen 

Read More

Vacation notice

9/18/2017 2:39 PM

China's National Day is coming, and most of the logistics companies will stop working, so we will stop working during the holiday.In addition, due to the delivery of the factory to our freight forwarder needs three days, we will stop the shipment early.

1, We will stop shipments September 27 - October 7,  During this period, you will still be able to continue place orders on our website, orders in this period will be shipped on October 8.

2, We will leave for the vacation from  October 1 - October 7  2017,  During this period, your mail we will reply within 24~48 hours, if any inconvenience please understand. 

September 18th, 2017 . 
Lance Chen 

Read More

Vacation Notice

8/1/2017 11:19 PM

We will leave for Summer Vacation from  Aug 2 to Aug 6 2017, as follows:

1, Please do not worry about shipping, all orders have been arranged for shipping .will still send the tracking number to the buyer once we get it.

2, During this period, your mail we will reply within 24~72 hours, if any inconvenience please understand.


3, During this period, you will still be able to continue place orders on our website, and warehouse staff on duty will continue to ship.

Aug 1st, 2017 . 
Lance Chen 


Read More

New products X4M and X6M !

7/21/2017 12:26 PM

The  new product X4M and X6M  on sale now! 

Read More

The products X4-800-USB and X6-800M have been closed and the new product X6M (new configuration) on sale now. 

Read More
per page

Items 1 to 8 of 27 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4